Selecting RXVCam360 Camera Tracking Mode

Regular users can only create temporary presets during ongoing meetings. These presets are automatically deleted at the end of the meeting.

To permanently configure the default Room preset or create permanent presets, you need to be logged in as admin (see Accessing Device Admin Settings).

➢ To select a Tracking Mode:
1. Do either of the following:
● From your RX-PAD, open the Edit Preset page (Camera Settings > Room > Edit Preset).

● From your RXV200, navigate to the camera display (via Camera Settings) and tap the Tracking Mode option on the vertical toolbar.

2. Select one of the following RXVCam360 camera tracking mode options:
● Smart Gallery (default)
● Manual
● Speaker tracking
● Discussion
● Panoramic
3. Use the following descriptions as a reference when configuring a tracking mode:

Smart Gallery

Recommended

Automatically identifies up to 18 people

Puts each in a dedicated frame

Maximum: 8 frames

When a person moves, the camera automatically tracks and keeps their head centered

Manual

Select an area to focus on

Use the remote controller to zoom in and out (five levels) and move up, down, left and right to select a focused area.

The selected area has a fixed 16:9 aspect ratio.

This mode does not have AI functions.

This mode is currently available only when using the PC.

Speaker Tracking

RXVCam360 follows the active speaker and automatically switches from the previous speaker to the next speaker within three seconds.

Discussion Mode

The lowermost panel displays a 360° panoramic view.

The second level displays an automatic layout of 1-3 speakers.

■ Only the person speaking is displayed.
■ Those not speaking are not displayed.

For using this mode with Composite AI, see Using RXVCam360 Discussion Mode with Composite AI.

Panoramic Mode

360° panoramic high-definition view

This mode does not have AI functions